close
Filter By
Price
Machine Type
Product Type
Kuhn, SMA - Tillage
221 items
![CHISEL SHANK 1-1/4 X 2 X 26](/userdocs/products/404-11015.jpg?width=300&format=webp)
CHISEL SHANK 1-1/4 X 2 X 26
404-11015
Replacement Chisel Plow Shank for Krause - 26" radius - Length (around curve) 41" - 50° angle. 7/8" top hole, 1/2" on bottom (hole and slot).
- $243.02 243.02 USD
![BEARING AND HOUSING KIT-KRAUSE DISC](/userdocs/products/864-sma1927kit.jpg?width=300&format=webp)
BEARING AND HOUSING KIT-KRAUSE DISC
864-SMA1927KIT
Includes 1 each SMA1927L Casting, SMA1927U Casting, SMA1927 bearing and 2 SMA45105 Side Rings.
- $105.45 105.45 USD
![WHEEL BEARING KIT FOR JD DISC](/userdocs/products/864-sma235bk.jpg?width=300&format=webp)
WHEEL BEARING KIT FOR JD DISC
864-SMA235BK
Bearing kit for John Deere transport wheel hub 230-235 and 1630-1640 ser# 017301 and later.
- $107.17 107.17 USD
![6 BOLT HUB FOR JD DISC HARROW](/userdocs/products/982-27616.jpg?width=300&format=webp)
6 BOLT HUB FOR JD DISC HARROW
982-27616
Transport Wheel Hub, fits John Deere Models 115, 200, 210, 220, 230, 235, 310, 330, 335, 360, 370, 440, 455, 1630 and 1640. Requires 6 9/16"-18 Wheel Bolts. Uses Bearing Kit SMA235BK and Dust Cap 982-27618. Replaces A27616.
- $98.19 98.19 USD
![22X6.5MM PLAIN SEEDER-306001A1](/userdocs/products/845-p22149.jpg?width=300&format=webp)
22X6.5MM PLAIN SEEDER-306001A1
845-P22149
22" x 6.35mm Single Disc Opener Blade, Has 2.525" center hole, 4 holes for 1/2" bolts on 4" circle, Fits Case IH SDX and Precision Disk 30/40 Drills. Replaces 306001A1.
- $97.91 97.91 USD
![FOOTPIECE FOR 1"X3" SHANK](/userdocs/products/509-fp1.jpg?width=300&format=webp)
FOOTPIECE FOR 1"X3" SHANK
509-FP1
4" C-C hole spacing, 3/8" steel all welded footpiece. Adjustment slot is open to allow footpiece to trip. Fits Hamby, Roll-A-Cone, CandJ.
- $90.13 90.13 USD
![FOOTPIECE W/PLATE FRONT&REAR](/userdocs/products/509-fp1f.jpg?width=300&format=webp)
FOOTPIECE W/PLATE FRONT&REAR
509-FP1F
Plates have multiple holes Fits 1"x3" shank. 4" C-C hole spacing,
- $124.63 124.63 USD
![1X3 SHANK 4X4 TOOL BAR CLAMP](/userdocs/products/509-l44.jpg?width=300&format=webp)
1X3 SHANK 4X4 TOOL BAR CLAMP
509-L44
Toolbar Clamp, Fits 1" x 3" shank and a 4" x 4" toolbar, 3/8" x 6" body with 1" bolts and plated nuts, 16mm set screws.
- $83.93 83.93 USD
![1X3X30" SHANK W/FP1 FOOT PIECE](/userdocs/products/509-sf130.jpg?width=300&format=webp)
1X3X30" SHANK W/FP1 FOOT PIECE
509-SF130
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
- $115.34 115.34 USD